Need help?Do you have a question about the Mitutoyo HM-200A Series and is the answer not in the manual?
General| Brand | Mitutoyo |
|---|---|
| Model | HM-200A Series |
| Category | Test Equipment |
| Language | English |
Describes the MICRO-VICKERS HARDNESS TESTING MACHINE operation via touch panel.
Identifies key components of the Manual main unit and its back panel.
Details environmental requirements like temperature, humidity, and vibration for optimal performance.
Provides a diagram showing the standard example of required floor space for system installation.
Instructions on how to level the hardness testing machine before use.
Guidance on mounting components like the Manual XY stage and connecting them.
Details the step-by-step operation flow for performing a hardness test.
Procedure for powering on the main unit and what to expect on the display.
Instructions on zero-resetting the measuring microscope and taking indentation measurements.
Illustrates the navigation flow through the touch panel screens for operation and settings.
Covers conversion, OK/NG judgment, and output settings accessible from the SETUP 1 screen.
Details surface correction, reading correction, and fracture toughness test settings.
Configuration for indenter, objective lens, DIP switch, and data storage settings.
Guides on adjusting illumination, testing time, test force, and contact velocity.
Provides guidelines for keeping the hardness testing machine and test blocks in good condition.
Details the procedures for replacing indenters and objective lenses.
Explains how to verify the accuracy of the product after component replacement or transfer.
Lists common system operation symptoms and their remedies.
Addresses issues encountered during hardness testing and their solutions.
Provides a list of display codes and their corresponding error statuses.
Lists the primary technical specifications for HM-210A and HM-220A models.
Details the specifications for serial (RS-232C), USB, and Digimatic interfaces.
Contains various hardness conversion tables for different material standards.
Provides hardness conversion data for Mitutoyo Hard Steel.
ASTM E 140 conversion chart for hard steel (non-austenitic steels).
To Next Page
