Mitutoyo HM-200A Series - Data Edit (DATA EDIT)

No. 99MBG127A
5-20
5.4.3 Data edit (DATA EDIT)
It enables editing of hardness test result.
When changing the test condition during statistical analysis, the condition after the changing will
be enabled.
1. Press the [EDIT] button. ⇒The "SURFACE" screen is displayed.
When Nth test result is displayed:
· To show the N+1 test result
I. Press the
button.
II. The N+1 test result will be displayed.
· To show the N-1 test result
I. Press the button.
II. The N-1 test result will be displayed.
Pressing outputs the test result to the external output connector
Pressing returns to the previous screen.
Function button
Data selection
button
Button to go to
the previous
screen
Test result
Print button