No. 99MBG127A
5-6
<To set the lower limit>
1. Press the
button of the "LOWER".
⇒The numeric key is displayed.
2. Enter the lower limit and press the [ENT] button.
[CLR]: Zero-clears the upper or lower limit.
[ESC]: Restores the previous setting and numeric key closes.
[ENT]: Sets the upper or lower limit.
5.2.3 Output setting (OUTPUT)
This screen sets the way to output data from the testing machine.
Refer to "8.7 Specifications of external output" for the output format.
Refer to "1.3 Parts name" for connection of the devices.
CAUTION
1. In case there are no devices to be connected, set "OFF" for each.
2. Make sure to turn on the power to each peripheral device after turning on the power
to the hardness testing machine.
To Next Page
Loading...
