Mitutoyo HM-200A Series - Fracture Toughness Test Setting (IFM)

No. 99MBG127A
5-14
5.3.3 Fracture toughness test setting (IFM)
1. Press the [IFM] button.
2. The "IFM" screen is displayed.
3. Press the [OK] button to enable the function.
4. Press the button.
5. Enter the elastic modulus and press [ENT].
[ESC]: Restores the previous setting and numeric key closes.
[CLR]: Zero-clears the elastic modulus.
[ENT]: Sets the elastic modulus.
Pressing
returns to the previous screen.
Pressing returns to the "MEASUREMENT" screen.