Mitutoyo HM-200A Series - Standard Configuration of Manual Main Unit

No. 99MBG127A
1-2
1.2 Standard configuration of Manual main unit
The HM-200A series consists of HM-210A and HM-220A.
The following table describes the standard configuration.
Table 1-1
HM-210A HM-220A
Testing main unit for
manual use
HM-210 Manual main unit HM-220 Manual main unit
Requisite options
Manual XY stage unit 25x25 (code no. 810-420)
*1
Manual XY stage unit 50x50 (code no. 810-423)
*2
Factory options
Indenter shaft unit /hm-210 Indenter shaft unit /hm-220
Objective lens unit 2x
Objective lens unit 5x
Objective lens unit 10x
Objective lens unit 20x
Objective lens unit 100x
*1
Manual XY stage unit 1" x 1" is applicable for the code No. 810-424.
*2
Manual XY stage unit 2" x 2" is applicable for the code No. 810-427.
Fig. 1-1
Measuring
microscope
Manual XY stage unit
Manual main unit