Mitutoyo HM-200A Series - Handling each Part of the Testing Machine; Handling the Power Turret

5. Operation and various settings
No. 99MBG127A
5-43
5.7 Handling each part of the testing machine
5.7.1 Handling the power Turret
When using HM-210A or HM-220A, the turret can be rotated both manually and automatically.
· Manual operation: The Turret is rotated manually.
· Automatic operation: The Turret is rotated by pressing the switches on the panel.
This section describes automatic operation.
1. Press either of the power turret switches of the "MEASUREMENT" screen on the touch panel.
The turret rotates in the direction of the arrow.
2. The turret does not rotate to the parts without indenters or objective lenses.
Turret rotation buttons
The turret cannot be rotated any further to the right since
the Objective lens C is not attached.