Mitutoyo HM-200A Series - Setting the Objective Lens (OBJ)

5. Operation and various settings
No. 99MBG127A
5-27
5.5.2 Setting the Objective lens (OBJ)
Mag Rate: 2×, 5×, 10×, 20×, SL50×, 50×, 100×
Press the [OBJ] button.
The "OBJECTIVE LENS" screen is displayed.
Pressing returns to the previous screen.
Pressing returns to the "MEASUREMENT" screen.
<When setting the Objective lens A>
(The Objective lens B, C, D can be set as same as this procedure.)
1. Press the [OBJ A] button.
2. The settings for the Objective lens A are displayed.
The currently set lens has a green mark.
3. Set the magnification of the attached lens and press the [OK] button.
⇒Returns to the "OBJECTIVE LENS" screen.
Objective lenses
C and D can be
set to OFF.