No. 99MBG127A
5-30
5.5.5.2 Backup data error
Either of the following messages will be displayed at an occurrence of any backup data error
when pressing the
button after turning on the power again.
<In case of terminating normally (when turning off the power by pressing the
button.)>
If a data error is detected, the following message will be displayed.
Data is deleted by pressing the [OK] button, and transfers to the "MEASUREMENT" screen.
<In case of failing in termination (when turning off the power without pressing the button)>
The automatic data restoration runs.
1. If the data is successfully restored
The following message will be displayed, and transfers to the "MEASUREMENT" screen.