No. 99MBG127A
5-18
1. Press [NUMBER]. ⇒The "NUMBER" screen is displayed.
2. Press the button. ⇒The numeric key is displayed.
3. Enter the number of measuring points (2 to 256) and press the [ENT] button. ⇒The indenter
setting screen is displayed.
[CLR]: Zero-clears the number of measuring points.
[ESC]: Restores the previous setting and numeric key closes.
[ENT]: Sets the number of measuring points.
4. By setting it [ON], the statistical analysis is enabled.
Pressing returns to the previous screen.
Pressing returns to the "MEASUREMENT" screen.
To Next Page
Loading...
