5. Operation and various settings
No. 99MBG127A
5-37
· The test force between HV0.0001 (0.9807 × 10-3 N (0.1gf)) and HV0.001 (9.807 × 10-3 N
(1gf)) can be set in steps of HV0.0001 (0.9807 × 10-3 N (0.1gf)).
· The test force between HV0.001 (9.807 × 10-3 N (1gf)) and HV0.1 (980.7 × 10-3 N (100gf))
can be set in steps of HV0.001 (9.807 × 10-3 N (1gf)).
· The test force HV0.1 (980.7 × 10-3 N (100gf)) or higher can be set in steps of HV0.01 (98.07
× 10-3 N (10gf)).
For reference:
The default setting value is HV0.025 (245.2 × 10-3 N (25gf)).
<To set the test force>
1. Press the button on the screen.
⇒ "FORCE", "SPEED" and "GUIDE FOR CONDITION SETTING" are displayed.
2. Press the button of "FORCE". ⇒ The numeric key is displayed.
To Next Page
Loading...
