Dansensor® Lippke® 5000 EN User Guide 17
P/N 380419-C
05/2022
How does it work?
1. Prepare the package with a septum and place it on the base plate .
2. Move the test head downwards to penetrate the package making sure that the
needle
is fully seated onto the septum . Lock the test head in this position taking
into consideration that the test head should be allowed to move upwards as the package
inflates.
If, for some reason, you want to restrict the test head movement, you can do this by means
of the knob
.
3. Perform the test.
To Next Page
Loading...
