Dansensor® Lippke® 5000 EN User Guide 89
P/N 380419-C
05/2022
Edit Edit an existing test definition.
Test definition settings are described in "New" on page 91.
Most of the test definition parameters can only be edited if no
tests have been performed using the test definition or if the
parameter
Settings -> Device -> Lock Test has been
disabled.
When having edited a test definition, this message appears
when exiting the function:
Tap to delete existing data (if any) from the data log and
save changes.
New Creates a new, blank test definition.
See "New" on page 91 for details.
Copy Use this function to create a new test definition that is similar
to an existing test definition.
Test definition settings are described in "New" on page 91.
Delete When deleting a test definition, both the test definition and its
logged data are deleted.
The action must be confirmed before the test definition is
deleted.
To Next Page
Loading...
