Motorola Solutions AP-6511 Access Point System Reference Guide
5-62
5.4.2.7 Overriding a Profile’s Miscellaneous Network Configuration
Overriding a Profile’s Network Configuration
A profile can be configured to include a hostname in a DHCP lease for a requesting device and its profile.
This helps an administrator track the leased DHCP IP address by hostname for a device profile. When
numerous DHCP leases are assigned, an administrator can better track the leases when hostnames are used
instead of devices.
To include a hostnames in DHCP request:
1. Select Devices from the Configuration tab.
2. Select a target device (by double-clicking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides from the Device menu to expand it into sub menu options.
4. Select Network to expand its sub menu options.
5. Select Miscellaneous.
Figure 5-34 Profile Overrides - Network Miscellaneous screen
6. Select the Include Hostname in DHCP Request checkbox to include a hostname in a DHCP lease for
a requesting device. This feature is disabled by default.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To revert the override back to its original profile setting, select the
override icon to display an Action pop-up. Select the Remove Override checkbox to
revert the override to its original setting for this profile.
To Next Page
Loading...
