Motorola Solutions AP-6511 Access Point System Reference Guide
12-8
3. Select Copy to begin the file transfer. Selecting Reset reverts the screen to its last saved configuration.
12.1.3 Using the File Browser

Device Operations
The AP-6511 maintains a File Browser enabling an administrator to review the files currently residing on any
internal or external memory locations. Directories can be created and maintained for each File Browser
location and folders and files can be moved and deleted as an administrator interprets necessary.
To administrate files for managed devices and memory resources:
1. Select the Operations > Devices > File Browser.
Port Specify the port for transferring files. This option is not available for cf,
usb1, and usb2. Enter the port number directly or use the spinner control.
This parameter is required only when Server is selected as the Source.
IP Address Specify the IP address of the server used to transfer files. This option is not
valid for cf, usb1, and usb2. If IP address of the server is provided, a
Hostname is not required.
This parameter is required only when Server is selected as the Source.
Hostname If needed, specify a Hostname of the server transferring the file. This
option is not valid for cf, usb1, and usb2. If a hostname is provided, an IP
Address is not needed.
This field is only available when Server is selected in the From field.
Path Define the path to the file on the server. Enter the complete relative path
to the file.
This parameter is required only when Server is selected as the Source.
User Name Provide a user name to access a FTP or SFTP server.
This parameter is required only when Server is selected as the Source,
and the selected protocol is ftp or sftp.
Password Provide a password to access the FTP or SFTP server.
This parameter is required only when Server is selected as the Source,
and the selected protocol is ftp or sftp.
Target Select the target destination to transfer the file.
• Select Server if the destination is a remote server, then provide a URL
to the location of the server resource or select Advanced and provide
the same network address information described above.
• Select Access Point if the destination is an AP-6511.
To Next Page
Loading...
Need help?
General
