Motorola AP-6511 - AP Upgrade

Statistics
13-27
The Firmware Images field displays the following:
The Upgrade Status field displays the following:
13.3.4 AP Upgrade
 Access Point Statistics
The AP Upgrade screen displays basic information about Access Point upgrades. Use this screen to gather
version information, such as the installed firmware image version, the boot image and upgrade status.
To view the device statistics:
1. Select the Statistics menu from the Web UI.
2. Select the System tab from the left navigation pane and then select the Access Point node.
3. Select AP Upgrade.
Fallback Enabled Displays whether this option is enabled. This method enables a user to store
a known legacy version and a new version in device memory. The user can
test the new software, and use an automatic fallback, which loads the old
version in the device if the new version fails.
Fallback Image
Triggered
Displays whether the fallback image was triggered. The fallback image is an
old version of a known and operational software stored in device memory.
This allows a user to test a new version of software. If the new version fails,
the user can use the old version of the software.
Next Boot Designates this version as the version used the next time the AP is booted.
Primary Build
Date
Displays the build date when this version was created.
Primary Install
Date
Displays the date this version was installed.
Primary Version Displays the primary version string.
Secondary Build
Date
Displays the build date when this version was created.
Secondary
Install Date
Displays the date this secondary version was installed.
Secondary
Version
Displays the secondary version string.
Upgrade Status Displays the status of the image upgrade.
Upgrade Status
Time
Displays the time of the image upgrade.