Motorola Solutions AP-6511 Access Point System Reference Guide
5-66
5.4.3.2 Overriding a Profile’s Certificate Revocation List (CRL) Configuration
Overriding a Profile’s Security Configuration
A certificate revocation list (CRL) is a list of certificates that have been revoked or are no longer valid. A
certificate can be revoked if the certificate authority (CA) had improperly issued a certificate, or if a private-
key is compromised. The most common reason for revocation is the user no longer being in sole possession
of the private key.
To define a Certificate Revocation configuration or override:
1. Select Devices from the Configuration tab.
2. Select a target device (by double-clicking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides from the Device menu to expand it into sub menu options.
4. Select Security to expand its sub menu options.
5. Select Certificate Revocation.
Figure 5-36 Profile Overrides - Certificate Revocation screen
6. Select the + Add Row button to add a column within the Certificate Revocation List (CRL) Update
Interval table to quarantine certificates from use in the network.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To revert the override back to its original profile setting, select the
override icon to display an Action pop-up. Select the Remove Override checkbox to
revert the override to its original setting for this profile.
To Next Page
Loading...
