Motorola AP-6511 - Inventory

Motorola Solutions AP-6511 Access Point System Reference Guide
13-24
The RF Quality Index field displays the following:
The Utilization Index field displays the following:
The Client RF Quality Index field displays the following:
13.3.2 Inventory
 Access Point Statistics
The Inventory screen displays information about AP physical characteristics. Use this screen to gather
information on the performance of the different clients associated with the AP. Additionally, use this screen
to fine tune Access Point performance.
To view the access point inventory statistics:
1. Select the Statistics menu from the Web UI.
2. Select the System tab from the left navigation pane and then select the Access Point node.
3. Select Inventory.
Bottom Radios Displays radios having very low quality indices. RF quality index indicates the
overall RF performance. The RF quality indices are:
• 0–50 (poor)
• 50–75 (medium)
• 75–100 (good)
Radio MAC Displays a radio’s hardware encoded MAC address.
Radio Type Identifies whether the radio is a 802.11b, 802.11bg, 802.11bgn, 802.11a, or
802.11an.
Top Radios Displays the traffic indices of radios, which measures how efficiently the
traffic medium is used. This value is indicated as an integer.
Radio Id Displays a numerical value assigned to the radio as a unique identifier. For
example: 1, 2, or 3.
Radio Type Identifies whether the radio is an 802.11b, 802.11bg, 802.11bgn, 802.11a, or
an 802.11an.
Worst 5 Clients Displays clients having low RF quality.
Client MAC Displays a MAC address of the client having low RF indices.
Retry Rate Displays the average number of retries per packet. A high number indicates
possible network or hardware problems.