Motorola Solutions AP-6511 Access Point System Reference Guide
5-24
5.3 RF Domain Overrides
Use RF Domain Overrides to define configurations overriding the configuration set by the target device’s
original RF Domain assignment.
An AP-6511 RF Domain allows an administrator to assign configuration data to multiple devices deployed in
a common coverage area (floor, building or site). In such instances, there’s many configuration attributes
these devices share as their general client support roles are quite similar. However, device configurations
may need periodic refinement from their original RF Domain administered design. Unlike a RFS series
controller, an AP-6511 Access Point supports a single RF domain.
To define a device’s RF Domain override configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
3. Select a target device (by double-clinking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of the UI.
4. Select RF Domain Overrides from the Device menu to expand it into sub menu options.
5. Select RF Domain.
To Next Page
Loading...
