Device Configuration
5-25
Figure 5-15 RF Domain Overrides screen
6. Refer to the Basic Configuration field to review the basic settings defined for the target device’s RF
Domain configuration, and optionally assign/remove overrides to and from specific parameters.
7. Use the Smart RF Policy drop-down menu to apply a Smart RF policy to the RF Domain.
When a radio fails or is faulty, a Smart RF policy can used provide automatic recovery by instructing
neighboring Access Points to increase their transmit power to compensate for the coverage loss.
NOTE: A blue override icon (to the left of any parameter) defines the parameter as
having an override applied. To revert the override back to its original setting, select the
override icon to display an Action pop-up. Select the Remove Override checkbox to
revert the override to its original setting.
Location Displays the location set for the device as part of its RF Domain configuration.
Contact Displays the contact set for the device as part of its RF Domain configuration.
Time Zone Displays the time zone set for the device as part of its RF Domain configuration.
Country Code Displays the country code set for the device as part of its RF Domain
configuration.
To Next Page
Loading...
