Motorola Solutions AP-6511 Access Point System Reference Guide
7-24
7.2.4 Profile Interface Deployment Considerations
Profile Interface Configuration
Before defining a profile’s interface configuration (supporting Ethernet port, Virtual Interface, port channel
and Access Point radio configurations) refer to the following deployment guidelines to ensure these
configuration are optimally effective:
• When changing from a default DHCP address to a fixed IP address, set a static route first. This is critical
when the AP-6511 is being accessed from a subnet not directly connected to the Access Point and the
default route was set from DHCP.
• Take care not to modify an Access Point’s configuration using its resident Web UI, CLI or SNMP interfaces
when managed by a profile, or risk the Access Point having a configuration independent from the profile
until the profile can be uploaded to the Access Point once again.
To Next Page
Loading...
