Device Configuration
5-15
17. Select OK to export the defined trustpoint. Select Cancel to revert the screen to its last saved
configuration.
18. To optionally delete a trustpoint, select the Delete button from within the Certificate Management
screen. Provide the trustpoint name within the Delete Trustpoint screen and optionally select the
Delete RSA Key checkbox to remove the RSA key along with the trustpoint. Select OK to proceed with
the deletion, or Cancel to revert to the Certificate Management screen
5.2.2 RSA Key Management
Assigning Certificates
Refer to the RSA Keys screen to review existing RSA key configurations applied to managed devices. If an
existing key does not meet the needs of a pending certificate request, generate a new key or import or export
an existing key to and from a remote location.
Rivest, Shamir, and Adleman (RSA) is an algorithm for public key cryptography. It’s an algorithm that can be
used for certificate signing and encryption. When a device trustpoint is created, the RSA key is the private
key used with the trustpoint.
To review existing device RSA key configurations, generate additional keys or import/export keys to and from
remote locations:
1. Select the Launch Manager button from either the SSH RSA Key or RADIUS Server Certificate
parameters (within the Certificate Management screen).
2. Select RSA Keys from the upper, left-hand, side of the Certificate Management screen.
Hostname Provide the hostname of the server used to export the trustpoint. This option is
not valid for cf, usb1, and usb2.
Path Specify the path to the trustpoint. Enter the complete relative path to the file
on the server.
To Next Page
Loading...
