Motorola AP-6511 - Page 66

Motorola Solutions AP-6511 Access Point System Reference Guide
5-14
Figure 5-8 Certificate Management - Export Trustpoint screen
16. Define the following configuration parameters required for the Export of the trustpoint.
Trustpoint Name Enter the 32 character maximum name assigned to the target trustpoint. The
trustpoint signing the certificate can be a certificate authority, corporation or
individual.
Key Passphrase Define the key used by both the device and the server (or repository) of the
target trustpoint. Select the Show textbox to expose the actual characters
used in the key. Leaving the Show checkbox unselected displays the
passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the trustpoint. If needed, select
Advanced to expand the dialog to display network address information to the
location of the target trustpoint. The number of additional fields that populate
the screen is also dependent on the selected protocol.
Protocol Select the protocol used for exporting the target trustpoint. Available options
include:
tftp
ftp
sftp
http
cf
usb1
usb2
Port Use the spinner control to set the port. This option is not valid for cf, usb1, and
usb2.
IP Address Enter IP address of the server used to export the trustpoint This option is not
valid for cf, usb1, and usb2.