Operations
12-9
Figure 12-5 File Browser screen - flash
2. Refer to the following to determine whether a file needs to be deleted or included in a new folder for the
selected memory resource. The following display for each of the available memory resources.
3. If needed, use the Add New Folder utility to create a folder that servers as a directory for some or all
of the files for a selected memory resource. Once defined, select the Create Folder button to implement.
4. Optionally, use the Delete Folder or Delete File buttons to remove a folder or file from within the
memory resource.
12.1.4 AP Upgrade
Device Operations
To configure an AP upgrade for an AP-6511:
File Name Displays the name of the file residing on the selected flash, system, nvram
usb1 or usb2 location. The name cannot be modified from this location.
Size Displays the size of the file in kb. Use this information to help determine
whether the file should be moved or deleted.
Last Modified Lists a timestamp for the last time each listed file was modified. Use this
information to help determine the file’s relevance and whether it should be
deleted.