Device Configuration
5-65
6. Refer to the General field to assign or override the following:
7. Select OK to save the changes or overrides. Select Reset to revert to the last saved configuration.
Firewall Policy Use the drop-down menu to select an existing Firewall Policy to use as an
additional security mechanism with this profile. All devices using this profile
and Access Point must meet the requirements of the firewall policy to access
the network. A firewall is a mechanism enforcing access control, and is
considered a first line of defense in protecting proprietary information within
the network. The means by which this is accomplished varies, but in
principle, a firewall can be thought of as mechanisms both blocking and
permitting data traffic within the network. If an existing Firewall policy does
not meet your requirements, select the Create icon to create a new firewall
policy that can be applied to this profile. An existing policy can also be
selected and overridden as needed using the Edit icon. For more information,
see
Wireless Firewall on page 8-2 and
Configuring a Firewall Policy on page 8-2.
WEP Shared Key
Authentication
Select the radio button to require devices using this profile to use a WEP key
to access the network using this profile. Clients without Motorola adapters
need to use WEP keys manually configured as hexadecimal numbers. This
option is disabled by default.
To Next Page
Loading...
