Motorola Solutions AP-6511 Access Point System Reference Guide
6-18
Figure 6-7 WEP 64 screen
5. Configure the following WEP 64 settings:
Default WEP 64 keys are as follows:
• Key 1 1011121314
• Key 2 2021222324
• Key 3 3031323334
Generate Keys Specify a 4 to 32 character Pass Key and click the Generate button. The
pass key can be any alphanumeric string. The wireless controller, other
proprietary routers, and Motorola clients use the algorithm to convert an
ASCII string to the same hexadecimal number. Clients without Motorola
adapters need to use WEP keys manually configured as hexadecimal
numbers.
Keys 1-4 Use the Key #1-4 fields to specify key numbers. For WEP 64 (40-bit key),
the keys are 10 hexadecimal characters in length. Select one of these keys
for default activation by clicking its radio button.
Restore Default
WEP Keys
If you feel it necessary to restore the WEP algorithm back to its default
settings, click the Restore Default WEP Keys button.
To Next Page
Loading...
