Motorola AP-6511 - Page 154

Motorola Solutions AP-6511 Access Point System Reference Guide
6-20
Figure 6-8 WEP 128 screen
5. Configure the following WEP 128 settings:
Default WEP 128 keys are as follows:
• Key 1 101112131415161718191A1B1C
• Key 2 202122232425262728292A2B2C
• Key 3 303132333435363738393A3B3C
• Key 4 404142434445464748494A4B4C
6. Select OK when completed to update the WLAN’s WEP 128 encryption configuration. Select Reset to
revert the screen back to its last saved configuration.
Generate Keys Specify a 4 to 32 character Pass Key and click the Generate button. The
pass key can be any alphanumeric string. The wireless controller, other
proprietary routers, and Motorola clients use the algorithm to convert an
ASCII string to the same hexadecimal number. Clients without Motorola
adapters need to use WEP keys manually configured as hexadecimal
numbers.
Keys 1-4 Use the Key #1-4 areas to specify key numbers. For WEP 128 (104-bit key),
the keys are 26 hexadecimal characters in length. Select one of these keys
for default activation by clicking its radio button.
Restore Default
WEP Keys
If you feel it necessary to restore the WEP algorithm back to its default
settings, click the Restore Default WEP Keys button.