Motorola Solutions AP-6511 Access Point System Reference Guide
6-46
6. Configure the following parameters in respect to the intended Wireless Client Downstream Rate
Limit:
7. Set the following Downstream Random Early Detection Threshold settings for each access
category:
Video Traffic Set a percentage value for video traffic in the upstream direction. This is a
percentage of the maximum burst size for video traffic. Video traffic
exceeding the defined threshold is dropped by the client and a log message
is generated. The default threshold is 25%.
Voice Traffic Set a percentage value for voice traffic in the downstream direction. This
is a percentage of the maximum burst size for voice traffic. Voice traffic
exceeding the defined threshold is dropped by the client and a log message
is generated. The default threshold is 0%.0% means no early random
drops will occur.
Enable Select the Enable radio button to enable rate limiting for data transmitted
from connected wireless clients. Enabling this option does not invoke rate
limiting for data traffic in the upstream direction. This feature is disabled
by default.
Rate Define a downstream rate limit between 50 - 1,000,000 kbps.This limit
constitutes a threshold for the maximum the number of packets
transmitted or received by the client. Traffic that exceeds the defined rate
is dropped and a log message is generated. The default rate is
1,000 kbytes.
Maximum Burst
Size
Set a maximum burst size between 2 - 64 kbytes. The smaller the burst, the
less likely the downstream packet transmission will result in congestion
for the wireless client. The default burst size is 6 kbytes.
Background Traffic Set a percentage value for background traffic in the downstream direction.
This is a percentage of the maximum burst size for low priority traffic.
Background traffic exceeding the defined threshold is dropped by the client
and a log message is generated. The default is 50%.
Best Effort Traffic Set a percentage value for best effort traffic in the downstream direction.
This is a percentage of the maximum burst size for normal traffic. Best
effort traffic exceeding the defined threshold is dropped by the client and
a log message is generated. The default is 50%.
Video Traffic Set a percentage value for video traffic in the downstream direction. This
is a percentage of the maximum burst size for video traffic. Video traffic
exceeding the defined threshold is dropped by the client and a log message
is generated. The default is 25%
Voice Traffic Set a percentage value for voice traffic in the downstream direction. This
is a percentage of the maximum burst size for voice traffic. Voice traffic
exceeding the defined threshold is dropped by the client and a log message
is generated. The default threshold is 0%.0% means no early random
drops will occur.
To Next Page
Loading...
