Motorola Solutions AP-6511 Access Point System Reference Guide
7-2
3. Either select Add if creating a new profile or Edit if modifying the configuration on an existing profile.
Figure 7-1 Profile screen
4. Review the following information on existing profiles:
5. Select the Add button to create a new profile, Edit to revise a selected profile configuration or Delete
to permanently remove a selected profile.
The following tasks comprise required profile configuration activities:
Profile Lists the user-assigned name defined for each profile when created. Profile
names cannot be edited with a profiles configuration.
Adoption Policy Displays the AP-6511 adoption policy applied to this profile. At adoption, an AP
solicits and receives multiple adoption responses from controllers available on
the network. These adoption responses contain preference and loading policy
information the AP uses to select the optimum controller for adoption. By
default, an adoption policy generally distributes AP adoption evenly. Modify
existing adoption policies or create a new one as needed to meet the adoption
requirements of this particular profile.
Firewall Policy Displays the existing firewall policy, if any, assigned to each listed profile.
Firewall policies can be assigned when creating or editing a profile.
DHCP Server Policy Lists the name of the DHCP Server Policy used with each listed profile. The
DHCP server groups wireless clients based on defined user-class option
values. Clients with a defined set of user class values are segregated by class.
A DHCP server can associate multiple classes to each pool. Each class in a pool
is assigned an exclusive range of IP addresses.
Management Policy Lists the name of Management policies applied to each listed profile. A
management policy is a mechanism to allow/deny management access for
separate interfaces and protocols (HTTP, HTTPS, Telnet, SSH or SNMP).
Management access can be enabled/disabled as required for each policy.
To Next Page
Loading...
