Motorola Solutions AP-6511 Access Point System Reference Guide
9-6
7. Set the following Access parameters to define how hotspot access is permitted, RADIUS lookup
information and whether the hotspot’s login pages contain agreement terms that must be accepted
before access is granted to resources:
8. Set the following Client Settings to define the duration clients are allowed captive portal access and
when they’re timed out due to inactivity:
9. Use the DNS White List parameter to create a set of allowed destination IP addresses. These allowed
DNS destination IP addresses are called a Whitelist.
To effectively host hotspot pages on an external Web server, the IP address of the destination Web
server(s) should be in the Whitelist.
Refer to the drop-down menu of existing DNS White List entries to select a policy to be applied to this
captive portal policy. If no DNS Whitelist entries exist, select the Create or Edit icons and follow the
sub-steps below:
a. If creating a new Whitelist, assign it a name up to 32 characters in length.Use the + Add button to
populate the Whitelist table with Host and IP Index parameters that must be defined for each
Whitelist entry.
Access Type Select the radio button for the authentication scheme applied to wireless
clients using the captive portal for guest access. Options include:
No authentication required - Clients can freely access the captive portal
Web pages without authentication.
Generate Logging Record and Allow Access - Access is provided without
authentication, but a record of the accessing client is logged.
Custom User Information for RADIUS Authentication - When selected,
accessing clients are required to provide a 1-32 character lookup data
string used to authenticate client access.
RADIUS Authentication - An accessing client’s user credentials require
authentication with an external RADIUS resource before access to the
captive portal is granted. This is the default setting.
RADIUS Lookup
Information
When Custom User Information for RADIUS Authentication is
selected as the access type, provide a 1-32 character lookup information
string used as a customized authentication mechanism.
Terms and
Conditions page
Select this option with any access type to include terms that must be
adhered to for captive portal access. These terms are included in the
Agreement page when No authentication required is selected as the
access type, otherwise the terms appear in the Login page. The default
setting is disabled.
Client Access Time Use the spinner control to define the duration wireless clients are allowed
access to the network using the captive portal policy. Set an interval
between 30 - 10,800 minutes. The default interval is 1,440 minutes.
Inactivity Timeout Use the drop-down menu to specify an interval in either Minutes (5 - 30) or
Seconds (300 - 1,800) that, when exceeded, times out clients that have not
transmitted a packet within the captive portal.
To Next Page
Loading...
