Motorola Solutions AP-6511 Access Point System Reference Guide
9-20
Figure 9-11 Static Bindings Add screen
9. Define the following General parameters required to complete the creation of the static binding
configuration:
Client Identifier
Type
Use the drop-down menu whether the client is using a Hardware
Address or Client Identifier as its identifier type.
Value Provide a hardware address or client identifier value to the client to help
differentiate from other client identifiers.
IP Address Set the IP address of the client using this host pool.
Domain Name Provide a domain name of the current interface. Domain names aren’t case
sensitive and can contain alphabetic or numeric letters or a hyphen. A fully
qualified domain name (FQDN) consists of a host name plus a domain
name. For example, computername.domain.com
To Next Page
Loading...
