Motorola AP-6511 - Page 302

Motorola Solutions AP-6511 Access Point System Reference Guide
9-26
Figure 9-15 DHCP Class Name Add screen
3. If adding a new DHCP Class Name, assign a name representative of the device class supported. The
DHCP user class name should not exceed 32 characters.
4. Select a row within the Value column to enter a 32 character maximum value string.
5. Select the Multiple User Class radio button to enable multiple option values for the user class. This
allows the user class to transmit multiple option values to DHCP servers supporting multiple user class
options.
6. Select OK to save the updates to this DHCP class policy. Select Reset to revert the screen back to its last
saved configuration.