Motorola AP-6511 - Page 308

Motorola Solutions AP-6511 Access Point System Reference Guide
10-6
Figure 10-4 Administrators screen
2. If creating a new administrator, enter a user name in the User Name field. This is a mandatory field for
new administrators and cannot exceed 32 characters. Optimally assign a name representative of the user
and role.
3. Provide a strong password for the administrator in the Password field, once provided, Reconfirm the
password to ensure its accuracy. This is a mandatory field.
4. Select Access options to define the permitted access for the user. If required, all four options can be
selected and invoked simultaneously.
5. Select the Administrator Role for the administrator using this profile. Only one role can be assigned.
Web UI Select this option to enable access to the device’s Web UI.
Telnet Select this option to enable access to the device using TELNET.
SSH Select this option to enable access to the device using SSH.
Console Select this option to enable access to the device’s console.
Superuser Select this option to assign complete administrative rights to the user. This
entails all the roles listed for all the other administrative roles.
System Select System to allow the administrator to configure general settings like
NTP, boot parameters, licenses, perform image upgrade, auto install,
manager redundancy/clustering and control access.
Network Select this option to allow the user to configure all wired and wireless
parameters (IP configuration, VLANs, L2/L3 security, WLANs, radios etc).
Security Select Security to set the administrative rights for a security administrator
allowing the configuration of all security parameters.