Operations
12-15
2. Refer to the Certificate Details to review the certificate’s properties, self-signed credentials, validity
period and CA information.
3. To optionally import a certificate, select the Import button from the Trustpoints screen.
Figure 12-8 Import New Trustpoint screen
4. Define the following configuration parameters required for the Import of the trustpoint.
Trustpoint Name Enter the 32 character maximum name assigned to the target trustpoint. The
trustpoint signing the certificate can be a certificate authority, corporation or
individual.
Key Passphrase Define the key used by the target trustpoint. Select the Show textbox to
expose the actual characters used in the key. Leaving the Show checkbox
unselected displays the passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the trustpoint. If needed, select
Advanced to expand the dialog to display network address information to the
location of the target trustpoint. The number of additional fields that populate
the screen is also dependent on the selected protocol.
Protocol Select the protocol used for importing the target trustpoint. Available options
include:
• tftp
• ftp
• sftp
• http
•cf
•usb1
•usb2
To Next Page
Loading...
