Operations
12-19
Figure 12-11 Import Signed Cert screen
13.Define the following configuration parameters required for the Import of the CA certificate:
Certificate Name Enter the 32 character maximum name of the trustpoint with which the
certificate should be associated
From Network Select the From Network radio button to provide network address
information to the location of the target signed certificate. The number of
additional fields that populate the screen is also dependent on the selected
protocol. This is the default setting.
Cut and Paste Select the Cut and Paste radio button to simply copy an existing signed
certificate into the cut and past field. When pasting a signed certificate, no
additional network address information is required.
URL Provide the complete URL to the location of the signed certificate. If needed,
select Advanced to expand the dialog to display network address information
to the location of the signed certificate. The number of additional fields that
populate the screen is also dependent on the selected protocol.
Protocol Select the protocol used for importing the target signed certificate. Available
options include:
• tftp
• ftp
• sftp
• http
•cf
•usb1
•usb2
Port Use the spinner control to set the port. This option is not valid for cf, usb1, and
usb2.
To Next Page
Loading...
