Motorola Solutions AP-6511 Access Point System Reference Guide
5-20
1. Select the Launch Manager button from either the SSH RSA Key or RADIUS Server Certificate
parameters (within the Certificate Management screen).
2. Select Create Certificate from the upper, left-hand, side of the Certificate Management screen.
Figure 5-13 Certificate Management - Create Certificate screen
3. Define the following configuration parameters required to Create New Self-Signed Certificate:
Certificate Name Enter the 32 character maximum name assigned to identify the name of the
trustpoint associated with the certificate. A trustpoint represents a CA/identity
pair containing the identity of the CA, CA-specific configuration parameters,
and an association with an enrolled identity certificate.
Use an Existing RSA
Key
Select the radio button and use the drop-down menu to select the existing key
used by both the device and the server (or repository) of the target RSA key.
Create a New RSA
Key
To create a new RSA key, select the radio button to define 32 character name
used to identify the RSA key. Use the spinner control to set the size of the key
(between 1,024 - 2,048 bits). Motorola Solutions recommends leaving this
value at the default setting (1024) to ensure optimum functionality. For more
information on creating a new RSA key, see
RSA Key Management on page 5-15.
To Next Page
Loading...
