Motorola Solutions AP-6511 Access Point System Reference Guide
5-34
17.Select the Enable checkbox within the 802.1x Authentication field to enable a username and
password pair to be used when authenticating users on this port.
18.Select OK to save the changes made to the Ethernet port’s security configuration. Select Reset to revert
to the last saved configuration if you do not wish to commit the overrides.
NOTE: Some vendor solutions with VRRP enabled send ARP packets with Ethernet
SMAC as a physical MAC and inner ARP SMAC as VRRP MAC. If this configuration is
enabled, a packet is allowed, despite a conflict existing.
To Next Page
Loading...
