Device Configuration
5-41
Figure 5-24 Profile Overrides - Access Point Radio Settings tab
The Radio Settings tab displays by default.
8. Define or override the following radio configuration parameters from within the Properties field:
Description Provide or edit a description (1 - 64 characters in length) for the radio that helps
differentiate it from others with similar configurations.
Admin Status Either select the Active or Shutdown radio button to define this radio’s
current status. When defined as Active, the Access Point is operational and
available for client support.
Radio QoS Policy
Use the drop-down menu to specify an existing QoS policy to apply to the
Access Point radio in respect to its intended radio traffic. If there’s no existing
suiting the radio’s intended operation, select the Create icon to define a new
QoS policy that can be applied to this profile. For more information, see
Radio
QoS Policy on page 6-48
.
Association ACL Use the drop-down menu to specify an existing Association ACL policy to apply
to the Access Point radio. An Association ACL is a policy-based Access Control
List (ACL) that either prevents or allows wireless clients from connecting to a
Access Point radio. An ACL is a sequential collection of permit and deny
conditions that apply to packets. When a packet is received on an interface,
the fields in the packet are compared against applied ACLs to verify the packet
has the required permissions to be forwarded, based on the criteria specified
in the access lists. If a packet does not meet any of the criteria specified in the
ACL, the packet is dropped. Select the Create icon to define a new Association
ACL that can be applied to this profile. For more information, see
Association
ACL on page 6-52
.
To Next Page
Loading...
