VJ-1624X/1624WX/1924WX OPERATION MANUAL Before using
3.5 Test print 105
3.5.1 Nozzle check
It is used to check whether there are any clogged heads, or missing/blurred prints.
If the nozzle check result shows that the checked points are blurred or missing, perform head
cleaning.
6.2.3 Head cleaning
Perform nozzle check once again at the end of the work.
Refer to the following for printing procedure.
3.5 Test print
No nozzle clog Nozzle clogged
To Next Page
Loading...
Need help?
General