5 Panel setup menu VJ-1624X/1624WX/1924WX OPERATION MANUAL
222 5.1 Setup menu
(5) Micro Change menu
Sets up Micro Adjustment Change.
5.1.1.1.4 Pre-heater menu (VJ-1624X only)
Sets the temperature of Pre-heater.
Set to curb a rapid temperature change at the printing portion by pre-heating the media before printing.
• This function is not displayed for VJ-1624WX/1924WX.
• The set temperature of Pre-heater differs depending on the media.
Setup item Setting Description
Micro Adj.Change -5.00% to <0.00%> to 5.00% Sets up Micro Adjustment Change.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Pre-heater Off / <30ºC> to 50ºC Sets the temperature of Pre-heater.
1.Roll media
2.Pre-heater
3.Print head
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
To Next Page
Loading...
Need help?
General