MUTOH ValueJet VJ-1624X - Cleaning Menu

5 Panel setup menu VJ-1624X/1624WX/1924WX OPERATION MANUAL
256 5.3 Cleaning menu
5.3 Cleaning menu
Performs head cleaning.
TIP
Head cleaning can be operated when the printer is Normal.
Refer to the following for operation procedures.
6.2.3 Head cleaning
NOTE
• If the head height is set to High for VJ-1624WX, "Change Head Gap Low" is displayed on
Operation panel.
Set the head height to Low.
4.2.5.3 When setting the head height to Low
• For VJ-1624X, auto cleaning can be performed regardless of the head height.
Setup item Description
Short Discharges smaller amount of ink compared to "Normal".
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
Normal Select this mode normally.
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
Long Discharges larger amount of ink compare to "Normal".
Used when Print head does not improve by normal head cleaning.
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
Little Charge Refills a small amount of ink.
Charge a small amount of ink when printing is not stable after ink replenishment.
3.3 Filling ink
• [Enter] key:
"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.
Initial ink charge Performs the intial ink charge.
Even when using the printer whose ink has already been filled, when you use High-capacity
ink pack adapter for the first time, perform this initial ink charge.
3.3.5 When using High-capacity ink pack adapter for the first time on the
printer whose ink is filled.
• [Enter] key:
"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.
— • [Cancel] key: shifts to the previous menu.
5 Panel setup menu