7 Troubleshooting VJ-1624X/1624WX/1924WX OPERATION MANUAL
330 7.1 Malfunctions and failures
7.1.4 Printing-related troubleshooting
(1) Printing is partially stained or incomplete
Proper print quality may not be obtained with the media other than the recommended one.
(2) The printing position is incorrect (some parts of the media cannot be printed
on)
No. Possible cause Remedy Reference
1 Does the media include moisture? Replace it with the new media.
6.1.2
Replacing Roll
Media
2 Are you using the creased or wrinkled media?
3 Does the media bend? Use the recommended media.
When using media other than the
recommended one, set the Vacuum Fan menu.
4.2.1 Media
type
5.1.1.1.7
Vacuum Fan menu
No. Possible cause Remedy Reference
1 Is the loading position of the media correct? Load the media correctly.
3.4.2 Setting
Roll Media
2 Did you set up the origin and print position? Cancel or reset the settings of the origin and
print position.
5.1.8 Origin
menu
To Next Page