5 Panel setup menu VJ-1624X/1624WX/1924WX OPERATION MANUAL
242 5.1 Setup menu
5.1.15 Auto Cleaning menu
Configure the settings for the auto cleaning operation.
• The cleaning mode reflects the settings in Operation panel.
6.2.3 Head cleaning
• When the head height is set to High for VJ-1624WX/1924WX, auto cleaning is not performed.
• For VJ-1624X, auto cleaning can be performed regardless of the head height.
5.1.15.1 Idle Auto Cleaning
Set the auto cleaning interval for the standby mode.
Setup item Setting Description
Auto Cleaning WaitingTime Set the value for auto-cleaning in standby mode.
5.1.15.1 Idle Auto Cleaning
Printing time Set the value for auto cleaning during printing.
5.1.15.2 Printing Mode Auto Cleaning
Before printing Set the value for auto cleaning before printing.
5.1.15.3 Pre-printing Mode Auto Cleaning
— • [Enter] key: saves the setting and shifts to the sub menu.
• [Cancel] key: shifts to the previous menu.
5.1 Setup menu
Setup item Setting Description
WaitingTime Off - 10 mins - <360 mins> -
1440 mins
Sets the time for auto cleaning in WaitingTime mode.
• Off: Auto cleaning is not performed.
• Others: Perform the head cleaning selected in the Cleaning
menu after the setting time has elapsed.
6.2.3 Head cleaning
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.15 Auto Cleaning menu
To Next Page
Loading...
Need help?
General