VJ-1624X/1624WX/1924WX OPERATION MANUAL 7 Troubleshooting
7.1 Malfunctions and failures 325
7.1.2 Cannot print at all
(1) Does not work at all after power activation
(2) Does not work after loading the media
No. Possible cause Remedy Reference
1 Is Power cord set connected to the plug? Connect Power cord set.
3.1 Power
cord set
connection
2 Does the AC power supply provide the
specified voltage?
Connect the cable to another outlet.
3.1 Power
cord set
connection
3 Is Front cover open or Media loading lever
raised?
Close Front cover.
Lower Media loading lever.
3.4 Loading
media
4 Is Maintenance cover open? Close Maintenance cover.
6.2.4 Cleaning
Cleaning wiper
6.2.5 Cleaning
the circumference
of Print head
No. Possible cause Remedy Reference
1 Is Front cover open or Media loading lever
raised?
Close Front cover.
Lower Media loading lever.
3.4 Loading
media
2 Is Maintenance cover open? Close Maintenance cover.
6.2.4 Cleaning
Cleaning wiper
6.2.5 Cleaning
the circumference
of Print head
3 Is the media loaded at an angle? Load the media straight.
3.4 Loading
media
4 Is Ink cartridge inserted? Insert Ink cartridge.
6.1.1
Replacing Ink
cartridges
5 Are you using the recommended media? Use the recommended media.
4.2.1 Media
type
6 Is the printer being used in an environment
other than the one specified, such as in direct
sunlight?
Only use the printer in an environment that is
specified for use.
Installation
manual
To Next Page
Loading...
Need help?
General