VJ-1624X/1624WX/1924WX OPERATION MANUAL 7 Troubleshooting
7.2 Error messages 333
7.2 Error messages
This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1 Status messages
This section describes messages displayed during printer normal operation.
When the printer is operating correctly, each operation status is displayed on Operation panel as below.
No. Display Description Reference
1 Ready to Print Standby (Media is loaded). —
2 Media End Standby (Media is not loaded).
3.4 Loading
media
3 Receiving Receiving data. —
4 Analyzing data Analyzing data. —
5 Printing Under printing. —
6 PrintRestart – > ENTER Pausing printing.
Press the [Enter] key.
4.4.6 Pausing
printing
7 Warming Up Warming up Heater.
(VJ-1624X only)
—
8 Warming Up
Skip – > ENTER
Received the printing data while Heater is
warming up.
To start printing before Heater is warmed up,
press the [Enter] key.
(VJ-1624X only)
4.4.7 Starting
printing during
warming up (VJ-
1624X only)
9 Cleaning **% Cleaning the head.
Please wait a while.
6.2.3 Head
cleaning
10 Ink Refill **% Filling the ink.
Please wait a while.
3.3 Filling ink
11 SubTank Refill Filling the subtank.
Please wait a while.
3.3 Filling ink
12 Moving Origin Pos. Print head is moving to the original printing
position in the Origin menu.
Please wait a while.
5.1.8 Origin
menu
13 Confirm Position – > ENTER Print head is moving to the original printing
position in the Origin menu.
Press the [Enter] key.
5.1.8 Origin
menu
14 During Washing Cleaning Head.
Please wait a while.
5.1.19
Longstore menu
15 Remove Cartridges Perform head cleaning.
Remove Cartridge.
5.1.19
Longstore menu
16 ** Initializing ** Initializing the setting in the Initialization
menu.
Please wait a while.
5.1.21
Initialization menu
To Next Page