VJ-1624X/1624WX/1924WX OPERATION MANUAL 6 Maintenance
6.2 Cleaning the printer 303
6.2.4 Cleaning Cleaning wiper
This section describes how to clean Cleaning wiper.
(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning procedures
Follow the procedure below to clean Cleaning wiper.
Use Cleaning stick to clean Cleaning wiper.
For details of Cleaning stick, refer to 8.3 Options/Supply list.
1. If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• Operation panel display is Normal.
2. Display the CR Maintenance menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• "Menu1: Setup>" is displayed on Operation panel.
• Operation panel shifts to the Setup menu display.
To Next Page
Loading...
Need help?
General