VJ-1624X/1624WX/1924WX OPERATION MANUAL 5 Panel setup menu
5.1 Setup menu 229
5.1.2.1 Spitting Pass Count menu
Set the intervals that Print head returns to Spitting boxes when "On" or "On Media" is set in Spitting
menu. Print head returns to Spitting box every shuttle per the set number.
• If the number of spitting returns is set high, the spitting operation is not done on Spitting box.
Therefore there is a higher chance of nozzle clogging when printing for a long time. In such a case,
print quality cannot be guaranteed.
<Example of spitting operation>
Setup item Setting Description
ReturnCount <1 time> to 999 times Set the spitting return count.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.9 User Copy menu
Spitting setting Return Count setting Operation
On 1 time Perform the spitting operation on Spitting box every time
Print head returns to the origin position.
Spitting operation is not performed over the media.
On 5 times Performs the spitting operation on Spitting box on the origin
side every five times Print head returns to the origin position.
Spitting operation is not performed over the media.
On Media 1 time Performs the spitting operation on Spitting box on the origin
side every time Print head returns to the origin position.
Perform the spitting operation on Spitting box every time
Print head returns to the origin position.
On Media 5 times Performs the spitting operation on Spitting box on the origin
side every five times Print head returns to the origin position.
Perform the spitting operation on Spitting box every time
Print head returns to the origin position.
Off — Spitting is not performed on Spitting box or the media.
To Next Page
Loading...
Need help?
General