VJ-1624X/1624WX/1924WX OPERATION MANUAL 5 Panel setup menu
5.1 Setup menu 215
5.1.1.1.1 Print Mode menu
Settings for print quality (print mode) are set according to the usage of print data or print speed.
After setting the Print mode, the display changes to Effect menu.
Effect menu
• The printed images can be uneven depending on the media and print mode. In such cases, use the
following mode to clear unevenness.
• When using bidirectional print mode (refer to the following chart Details of print mode), switch it
to unidirectional print mode.
• When using Graphics 1 to 2, change it to Quality 1 to 4.
Setup item Setting Description
Mode Quality 1 Sets up print mode.
• Quality 1 to 4:
Suitable for printing photos. Sets up to perform high quality printing.
• Graphics 1 to 2:
Suitable for printing photos. Sets up to perform standard printing.
• Graphics 3 to 4:
Suitable for printing illustrations, etc. Sets up to perform standard
printing.
• Banner 1 to 4:
Suitable for outdoor signs and test printing. Sets up to perform high
speed printing.
Displays details of each print mode while pressing [>] key.
Details of print mode
Quality 2
Quality 3
Quality 4
Graphics 1
Graphics 2
Graphics 3
Graphics 4
Banner 1
Banner 2
Banner 3
Banner 4
— • [Enter] key: saves the setting and shifts to the sub menu.
Effect menu
• [Cancel] key: cancels the setting and shifts to the previous menu.
5.1.1.1 User Type advanced setup menu
To Next Page
Loading...
Need help?
General