Before using VJ-1624X/1624WX/1924WX OPERATION MANUAL
100 3.4 Loading media
3.4.6 Releasing pressure arms individually (VJ-1624WX/1924WX
only)
When printing on thin media or media without stiffness, the media rubs against the print head and
becomes dirty. In such a case, it may improve when releasing the pressure arms holding both sides of
media.
When releasing the pressure arms individually, always conduct media feed compensation.
• This function is for VJ-1624WX/1924WX only.
• Thin media or media without stiffness is likely to be wrinkled during printing. Wrinkles can contact
the bottom side of the print head causing the media to become dirty. When both edges of the
pressure arms of media are released, it can prevent wrinkles.
1. Raise front Media loading lever.
2. Open the front cover.
No. Name
1
Media loading lever
No. Name
1
Front cover
To Next Page
Loading...
Need help?
General