VJ-1624X/1624WX/1924WX OPERATION MANUAL 5 Panel setup menu
5.1 Setup menu 223
5.1.1.1.5 Platen Heater menu (VJ-1624X only)
Sets the temperature of Platen heater.
Set to improve print quality by allowing the ink to settle by heat.
• This function is not displayed for VJ-1624WX/1924WX.
• The set temperature of Platen heater differs depending on the media.
Setup item Setting Description
Platen heater Off / <30ºC> to 50ºC Sets the temperature of Platen heater.
1.Roll media
2.Platen heater
3.Print head
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
To Next Page