4 Handling the printer VJ-1624X/1624WX/1924WX OPERATION MANUAL
164 4.1 Print flow chart
4.1 Print flow chart
The following flow chart illustrates the procedure to perform printing with the printer.
Refer to each section as required.
Since VJ-1624X is equipped with Heaters, strictly comply with the following Warnings and Cautions.
• Do not place any combustible materials on Platen while the heater is working.
There may be a risk of fire.
• Do not spill flammable liquid on Platen.
It may cause a fire.
• Do not touch Media guide while printing.
Media guide becomes very hot and you could burn yourself.
• Do not touch Media feed slot, Platen, and Media guide while Heater is working.
Media feed slot, Platen, and Media guide become very hot and you could burn
yourself.
• Ventilate the workplace.
Not doing so may cause nausea or a fire hazard.
1. Create print data.
Create print data with application software.
↓
2. Turn the power ON and set the media.
3.4 Loading media
4.2 Media
↓
3. Set up printing conditions.
4.3 Menu setups on Operation panel
↓
4. Perform printing.
4.4 Operating from Operation panel
To Next Page
Loading...
Need help?
General